What we stock
Typical floor stock · McHenry
Steel, aluminum and stainless held on the floor and cut to size at the counter. No minimum order, and in most cases while you wait.
Everything at true relative size
Rendered from the AISC and CSW dimension tables with one orthographic camera, so these are comparable to each other and to the 12 inch rule at the right.
Square Tube
Square structural and mechanical tube. Gauge wall for railing and frame work, fractional wall for structural.
20 nominal sizes · 87 wall and material variants
Nothing in this shape matches that size.
Rectangular Tube
Rectangular tube, listed by the two outside dimensions. We stock both orientations, so ask either way round.
13 nominal sizes · 86 wall and material variants
Nothing in this shape matches that size.
Pipe
Sized by nominal bore and schedule, not outside diameter. A 2" Sch 40 pipe measures 2.375" across.
17 nominal sizes · 49 wall and material variants
Nothing in this shape matches that size.
Round Tube, Electric-Weld
Sized by actual outside diameter and wall. A 2" OD tube really is 2.000" across, unlike 2" pipe.
16 nominal sizes · 48 wall and material variants
Nothing in this shape matches that size.
DOM Tube
Drawn over mandrel, for tighter wall tolerance and a smooth bore. Bought when the inside diameter has to be right.
22 nominal sizes · 72 wall and material variants
Nothing in this shape matches that size.
Railing Stock
Lightweight rail pipe and 180-grit polished stainless, held for handrail work.
2 nominal sizes · 3 wall and material variants
Nothing in this shape matches that size.
Angle CALL TO CONFIRM
Hot-rolled equal-leg angle. Sold by the pound at the counter.
Common sizes. Call to confirm what is on the floor today.
18 nominal legs
Nothing in this shape matches that size.
Flat Bar CALL TO CONFIRM
Hot-rolled flat. Same counter line as angle.
Common sizes. Call to confirm what is on the floor today.
24 nominal widths
Nothing in this shape matches that size.
Round Bar CALL TO CONFIRM
Hot-rolled round, solid. Cold-finished and drill rod also held.
Common sizes. Call to confirm what is on the floor today.
23 nominal diameters
Nothing in this shape matches that size.
Channel CALL TO CONFIRM
Standard C and MC channel, sized by depth.
Common sizes. Call to confirm what is on the floor today.
12 nominal depths
Nothing in this shape matches that size.
Wide-Flange Beam CALL TO CONFIRM
W and S sections. Larger sections are normally brought in for the job.
Common sizes. Call to confirm what is on the floor today.
11 nominal depths
Nothing in this shape matches that size.
Plate CALL TO CONFIRM
Hot-rolled plate, plus AR400 abrasion plate and flitch plate.
Common sizes. Call to confirm what is on the floor today.
13 nominal thicknesses
Nothing in this shape matches that size.
Sheet CALL TO CONFIRM
Hot-rolled, cold-rolled and galvanized sheet, down to 26 ga, plus 6061 aluminum.
Common sizes. Call to confirm what is on the floor today.
11 nominal gauges
Nothing in this shape matches that size.
Expanded Metal and Grating CALL TO CONFIRM
Expanded metal in full 4 x 8 sheets and in drops, plus bar grating.
Common sizes. Call to confirm what is on the floor today.
Nothing in this shape matches that size.
Welding gas, wire, rod and abrasives are stocked at the counter alongside the steel. Call and we will tell you what is on the shelf.
Call UsNotes
- Sizes shown are nominal. Square and rectangular tube are outside dimensions; pipe is nominal bore and does not equal its outside diameter.
- Not every wall is held in every size, and not every material in every wall. The counter will tell you in one call.
- Stock lengths are cut down at the counter. There is no minimum order.
- Angle, flat bar, round bar, channel, beam, plate, sheet and expanded metal are sold by the pound at the counter, so what is on the floor moves with the work. The sizes listed for those shapes are the common ones. Call to confirm before you drive out.
Bring the part in. We will measure it and cut from stock.
Call Us
